DG94-00520A (reinforced) Gas Range Oven Igniter Fits Sam.sung Oven Igniter NX58H5600SS Nx58H9500WS,for G-E Whirl-pool Hot-point Gas Oven Igniter Replaces 2692271 AP5577941 WB13K21 AP5577941

Use three-layer reinforcement protection to reduce damage to the ignition head. If there is any damage during the arrival process, please contact us DG94-00520A is compatible with the following models and can be directly replaced: AP55779412692271, EAP4241428, PS4241428, ERP DG94-00520A. It has undergone professional aging and insulation testing to ensure optimal performance and safety. If you receive a product with slight discoloration, please do not worry, as this is normal. Easy Installation "Before starting any maintenance, it is necessary to unplug the power and wear gloves to ensure your safety. Our DG94-00520A gas stove igniter ensures easy and worry free installation, and the interior of the igniter is very fragile, so be careful during installation. If the connection ports do not match, you can easily cut off the existing connection wires and connect them to the device using nuts. In addition to Samsung, oven brands compatible with DG94-00520A also include: Kenmore: Some Kenmore gas ovens are co produced with Samsung, with the same specifications for igniters (such as Kenmore's NX series models). Whirlpool: Compatibility is achieved through universal igniter models (such as WB13K21, Norton 501a), and the plug and installation hole positions need to be checked. GE (General Electric): Some GE gas ovens support replacement with DG94-00520A (need to confirm if the model is compatible). Crosley: Some Crosley gas ovens can directly use this igniter. Hotpoint: Compatible with universal igniter models, commonly found in some Hotpoint gas ovens. Confirm the brand and model of the oven Search for the body nameplate: usually located on the inside of the oven door, the edge of the control panel, or the back of the body, check the part number and specifications of the original igniter Dismantling the old igniter: After turning off the gas and power, open the oven chamber and find the igniter (usually located near the gas nozzle, inside the metal cover). Check part number: The old igniter usually has the original factory part number printed on it (such as "DG94-00520A" and "5303935066"). Measure physical dimensions: Use a caliper or ruler to measure the length, width, installation hole spacing, plug shape (such as two pin Molex, flat plug), wire length and quantity of the igniter. Using brand alignment and universal model query Brand co branded models: Samsung, Kenmore, Whirlpool, and other brands often share accessories (for example, some Kenmore models are co branded with Samsung NX series and can directly use DG94-00520A). Universal alternative models: Some igniters are cross brand universal models (such as Norton 501a, AP5577941, 2692271, etc.), and it is necessary to confirm that they are in the "compatibility list" provided by the seller with your oven model.

• Use three-layer reinforcement protection to reduce damage to the ignition head. If there is any damage during the arrival process, please contact us
• DG94-00520A is compatible with the following models and can be directly replaced: AP55779412692271, EAP4241428, PS4241428, and ERP DG94-005200A. Professional aging and insulation testing is conducted to ensure optimal performance and safety. If you receive a product with slight discoloration, please do not worry as this is measured after testing. The lighter temperature can quickly reach 2000-2800F within 1 minute
• Compatible with Sam-sung models NX58F5500SS/AA,FX510BGS/XAA,NX58H5600SS/AA,NX58K9500WG/AA,NX58M6630SS/AA,NX58H9500WS/AC,NX58H9500WS/AA,NX58K7850SS/AA,FX710BGS/XAA,NX58K9850SS/AA,NX58H5650WS/AA,NX58H9950WS/AA,NX58K3310SS/AA,NX58M6650WG/AA,NX58K3310SB/AA,NX58K3310SW/AA,NX583G0VBBB/AA,NX58F5500SB/AA,NX58F5500SW/AA,NX58F5700WS/AA,NX583G0VBSR/AA,NX583G0VBWW/AA,NX58F5300SS/AA,NX58J5600SG/AA gas oven,etc.
• The oven igniter is equipped with a high-temperature stainless steel cover to protect the igniter, including 2 ceramic wire nuts, 1 connector plug, and 2 connecting wires. (Ensure that the power plug matches the plug you want to replace)
• Easy Installation "Before starting any maintenance, it is necessary to unplug the power and wear gloves to ensure your safety. Our DG94-00520A gas stove igniter ensures easy and worry free installation, and the interior of the igniter is very fragile, so be careful during installation. If the connection ports do not match, you can easily cut off the existing connection wires and connect them to the device using nuts.