Chevy Claimer Oil Pan w/Inspect, Plug, RH Dipstick, '80-'85

Speedway's claimer oil pan is our best-selling circle-track pan. Low cost, high quality pan designed for the budget racer. Six quart capacity, 7-1/4" deep with two gates for oil flow control. Fits with stock or mini starter. S/B Compatible with Chevy. Will not fit rear steer cars unless the engine has been moved back. 5-3/4" center-to-center of rear bolts. 7-1/4" deep at the deep end. 4-1/2" deep at the shallow end. Expanded well measures 10-5/8" wide, 10" long, 2-5/8" deep. Vertical half moon notch in the rear near the drain plug is 1" from the rear corner, 1" wide and 5/8" deep. This notch is on the passenger side at rear. Drain plug is on the passenger side, approximately 1" from the rear corner to center. Has 1" NPT bung pre-welded with plug. Meets 2011 IMCA rules. IMCA Approved.

• Fits 1980 to 1985 small block Compatible with Chevy engines with a RH dipstick location
• The oil pan has two oil control gates, one for oil going forward and one for oil going to the right side kick out
• 1" inspection plug is welded to left side to meet rule requirements
• Metric (G body) applications will need to raise the engine mounts to clear the front of the oil pan
• Intended specifically for left hand turn circle track cars